The processing of raw materials and machinery:
1.Plastic 2.Wood flour 3.Coupling
4.powder 5.Extruder 6.Mixing machine
7.Granulator 8.Dehydration temperature treatment 9.Cutting table
Mixer mixing process:
1.Plastic 2.Wood flour 3.Coupling
4.powder 5.Mixing machine
Mixer mixing process:
1.Plastic 2.Wood flour 3.Coupling 4.powder
Granulation process:
1.The raw material to be blender stir the raw material input granulator, granulating machine high temperature heating, dehydration, cooling and a series of processes, the raw materials processed into wood particles, which is the wood products manufacturing direct materials
2.Granulator 3.Raw materials 4.Dehydration temperature treatment 5.Bagging 6.Particle
Material into the extruder process:
1.Hopper 2.Wood particles 3.Extruder
Screw structure introduced：
What happened in the spiral tube material?
1.Raw materials will enter
2.Resistance wire is wrapped around the spiral wall, the conduction heating by the heat conduction, convection, radiation interaction, and the material is heated and melted .
3.Material through the gap between the screw into the veins in the melting temperature after the solenoid, and by the screw full traction stirring together the raw materials, through the extruder head and slowly abrasive extrusion molding.
1.Screw
Melted state:
1.Heati 2.Fusion
Extrusion process:
1.Raw material in a molten state under stirring and the screw is pushed to the traction head extrusion die, slowly extrusion.
2.Abrasives
3.Abrasive extrusion
Cooling and drying:
1.Drying 2.Water cooling
3.After extrusion need to water cooling and drying 4.Cooling Station
Cutting
1.wpc 2.Chainsaw
3.According to customer needs, set the length of the WPC, the sensor driven by lower and upper cutting blade.